6.7.6 Duress Alarm Parameters 

There are duress  alarm parameters setting in  the device. When an employee comes across a duress situation, he can use the set duress alarm mode to verify. The device will open the door as usual, but the alarm signal will be sent to the alarm.

2014-05-23 9-40-50
1:  1  Trigger: if  select  “Yes”,  when  user  use  1: 1 match mode, alarm signal will come out. Or there is no alarm signal.
1: N Trigger: if select “Yes”, when user use 1: N match mode, alarm signal will come out. Or there is no alarm signal.
Password Trigger: If select “Yes”, when a user use password verification mode, alarm signal will come out. Or there is no alarm signal.
Alarm Delay: After duress alarm gets started, the alarm signal will not output directly. It can be defined. After the set time period, the alarm signal will be generated automatically (0­255 seconds).

ย้อนกลับ กลับสู่เมนูหลัก ถัดไป