Category Archives: Uncategorized

Tool Bar

5-28-2014 9-56-58 AMCom : Com port selected depends on which port of PC be used.
LAN : LAN base selected depends on which items and its node ID connected.
Line : Y(Blue): Well.
X(Red): Not connected well.
?(Black): Not identified.
716 : The functions of AR-716E, please set them up here for synchronization.
82X : The functions of AR-829/821EF, please set up here for synchronization.
881EF/EV : The functions of AR-881EFV/829EV5, please set up here for synchronization.
LOG : Login again

ย้อนกลับ กลับสู่เมนูหลัก ถัดไป

The Purpose of Networking

SOYAL has not only got capabilities in hardware and firmware developing, we also proud of our software support which always being a weakness for other manufacturers.
Basically, we provide with 701Server which as a bridge to communicate between PC and controller. Then all of transactions be analyzed and reported in 701Client, which also provide you with useful functions for Timeattendance and access control purposes.

701Server is a resident software, is responsible for the computer and the correspondence, as well as the customer system’s hardware plan, like the correspondence port configuration, the acquisition of information, the controller parameter configuration, the network construction, Check connection status and so on, 701Server main
task is to set the hardware and communication parameters.

กลับสู่เมนูหลัก ถัดไป

SystemParametersSetting

The way to show the ”System Parameters Setting” window28-5-2557 11-51-53

Step 1. ABA Card ID Format [32bits]: Card ID must use ABA type in 【User Card Edit】
Step 2. Error Message Confirm: When message is error, the system displays an error message signs, managers must to confirm, if managers doesn’t confirm, the next data will not be displayed.28-5-2557 11-53-11

Step 3. Alarm Message Confirm: When “Force Entrance” or “Door Open Too Long”,the system displays an alarm message signs, managers must to confirm, if managers doesn’t confirm, the next data will not be displayed.
28-5-2557 11-53-30

Step 4. Show Detail Node Address: The message will show controller’s Node ID.
Step 5. Screen Saver Function;Wait Timer(SEC.): When no new messages will automatically hide by Wait Timer.
Step 6. Popup Client at each Message: When an event occurs, it will automatically display.
Step 7. Enable Huge-Door-Group Mode: When connected to “Multi-door Networking controller”,must to select this mode. If you used this mode,the setting will different in28-5-2557 11-54-17

In Huge-Door-Group Mode, “Door Name Editor” will show:

28-5-2557 11-54-39

1.Node of Controller:
1. H series access controller (AR-721H) connect under the Multi-Door       Networking Controller(AR-716E):AR-716E’s node ID.
2. E series access controller (AR-829E): access controller node ID.
3. H series access controller (AR-721H) connect with PC directly: access controller door number H.
2.Door Number of Reader:
1. H series access controller (AR-721H) connect under the Multi-Door Networking Controller(AR-716E):
access controller door number L.
2. E series access controller (AR-829E): access controller door number.
3. H series access controller (AR-721H) connect with PC directly: access controller door number L.
3.Name: the name of door number.

Step 8. Atime Attendance Settings: By weekly or Monthly.
Step 9. Shown on the contents of the report.
Step 10. List Lnsurance in Month Report.
Step 11. Enter the holiday according to company needs.
Step 12. Duty Hours Depends On: “Office Time” or “Real Off Duty Time”
Step 13. This feature applies to the factory overtime hours, rest time will be deducted.
Step 14. Insurance rate.
Step 15. Insurance Value.
Step 16. Press “OK”

28-5-2557 13-01-2628-5-2557 13-07-17

 

ย้อนกลับ กลับสู่เมนูหลัก ถัดไป

ViewoptionofReport/History

Before exporting the report can be the first to set parameters
1. History
2. Attendance report
3. Message interval

There are two ways to show ”View option of Report/History” window:28-5-2557 11-06-53and28-5-2557 11-08-42

Step 1. Specify Door: Choose a specific doors message.
Step 2. Select department.
Step 3. Select Start Date & End Date.
Step 4. Select Time Range.
Step 5. Show Range Card Only: Only in Range. (ex: 0~10)。
Step 6. Show Range Card Only: Sorting.
Step 7. Show Similar String User: Enter the keyword, the system will start the search, support for all reports.
Step 8. Only Expire Parking Time: For parking
Step 9. Only 992E Message: If connecting AR-401E, AR401E messages show only.
Step 10. Time Sorting: For more than two controllers, according to chronological display.
Step 11. Abnormal Events Only.
Step 12. Skip while user name is empty
Step 13. Skip Invalid user
Step 14. Skip empty record of MonRep
Step 15. Skip expiry record of MonRep
Step 16. Delay On Duty: Latecomers will be listed on the report.
Step 17. Early off Duty: Employees leave early will be listed on the report.
Step 18. NEGL Duty: Absenteeism will be listed on the report.
Step 19. Antipass-back Error
Step 20. Time Zone Error
Step 21. Door Group Error
※ In order to avoid computer search will take too long, you must specify your search.
Step 22. Only Leave User in Summary Report.
Step 23. Abnormal Events : Abnormal Events Define window will appear.
Step 24. Abnormal Events: 1.Invalid Card,2.Expiry Date,3.Door Open Too Long,4.Force Entrance,5.Fingerprint,6.Controller Off Line.
Step 25. Define Abnormal Access.
Step 26. Flash Interval too Short(min)
Step 27. Moniting Time Zone

28-5-2557 11-10-0628-5-2557 11-23-59

 

ย้อนกลับ กลับสู่เมนูหลัก ถัดไป